A smooth internet connection is more significant than ever in the contemporary world. Many people depend on their Wi-Fi networks to keep things going well, whether it’s for business, enjoyment, or staying in touch with loved ones. Because they offer improved coverage and performance in bigger homes or workplaces, mesh networking systems like the Linksys Velop are becoming a more and more popular option.
The LED indicator lights, which enable users to quickly grasp the health of their network, are one of the main advantages of these systems. Solid white or blue lights often signal that everything is operating as it should, but other hues, like red or purple, might point to possible problems. You may be asking what a Linksys Velop Purple Light indicates and how to fix it if you’ve observed one.
We’ll go into great detail in this essay on the meaning of the purple light on the Linksys Velop, possible causes, and practical troubleshooting techniques.
Gaining Knowledge about the Linksys Velop Light System
Prior to delving into the nuances of the purple light, it’s critical to realize that Linksys Velop routers convey their status using a color-coded light system. Here’s a brief rundown of typical LED light colors and what they mean:
- Solid Blue Light: This specifies that the node is up and working, with an internet linking.
- Solid White Light: Usually following setup, the equipment is operating as intended.
- Solid Red Light: This indicates that the node is not online and is offline.
- Yellow light that flashes: A node is trying to start linking with an alternative node.
- Linksys velop purple light blinking: linksys velop purple light flashing indicates that the node has not yet been configured but is ready for configuration.
- Solid Purple Light: This indicates that the node is in setup mode, which is typically the result of a device reset or the initial installation of the system.
Note: A steady blue or white light indicates that everything is working correctly for the majority of users.
What does purple light on linksys velop mean?
When the Linksys Velop router or node is in setup mode and not fully configured or connected to the internet, it is usually indicated by a solid purple light. This is typical and a necessary step in the installation procedure if you recently bought the gadget or reset it. After attempting to set up the device, if the purple light still appears, it can mean that there is a problem and more linksys velop troubleshooting purple light is required.
Typical Circumstances in Which the Purple Light Emerges
- Following a Factory Reset: Your Linksys Velop will revert to its basic configuration if you have reset it to its factory settings. As it waits for setup, a solid purple glow will emerge.
- First-Time Installation: Prior to the device connecting to the internet and other nodes, you will notice the purple light when you are configuring your Velop system for the first time.
- Ineffective Setup Attempt: The Linksys Velop Purple Light may continue to flash during setup, indicating that the system has not been configured correctly.
- Problems with Network Connectivity: In certain cases, even after the system has been configured, if the router is unable to maintain a steady connection with the modem or the internet, a purple light could show.
How to Fix the Linksys Velop Purple Light Problems
Although it might be annoying to see Linksys Velop Purple Light, fixing the problem is typically simple. To fix linksys velop purple light not working problem, take these actions:
Verify Your Internet Access
Ascertaining if your internet service is operational is a smart idea before beginning any complex troubleshooting. Occasionally, your ISP may be the issue rather than the router itself. How to make sure:
- Restart your modem: After releasing the modem from power, wait, and replug it. Allow it to reconnect for a few minutes.
- Straight link: Straightforward connection testing If you want to connect a computer straight to your modem, use an Ethernet cable. The Velop system, rather than your internet connection, is probably the problem if your machine is able to connect to the internet.
- Look for disruptions on ISPs: ISP disruptions occur from time to time. To be sure there are no lingering problems in your location, check the website of your provider or give customer support a call.
Turn Your Linksys Velop Router Back On.
A simple restart can address many difficulties, including those creating a persistent purple light. Here’s how to get your Velop going again:
- Take the Velop node out of the electrical socket.
- Replug it in again.
- Give the node a few minutes to reconnect and boot up.
If the purple light goes out and is replaced with a white or blue light, it’s possible that there was a brief malfunction that has since been fixed.
Completing Setup Once more
Make sure you adhere to the proper linksys velop setup procedures while configuring the Linksys Velop for the first time or following a reset:
- Get the Linksys app here: The Linksys app makes setting up the Velop system the simplest since it walks you through every step of the setup procedure.
- Observe the instructions on the screen: Launch the application, choose “Set up a New Wi-Fi Network,” and adhere to the instructions.
- Make Sure It’s Placed Correctly: Position the primary Velop node near the modem and make sure all of the wires are attached firmly.
- provide Correct Credentials: Make careful to provide your ISP’s credentials accurately when requested, if necessary.
The purple light should become a solid white or blue light when the setup is successful, showing that the gadget is connected and operating as intended.
Look for updates to the firmware
Sometimes, malfunctions or out-of-date firmware might lead to connectivity problems. Confirm that the firmware on your Velop is fresh:
- Get Linksys app open.
- Depending on the version of your app, navigate to Linksys velop Firmware Update or Network Administration.
- Verify whether an modernized firmware version is available and elevate it if it is.
- Any software-related problems that are producing the purple light should be fixed via the firmware upgrade procedure.
Factory Reset the Velop Node
After trying the aforementioned fixes and the purple light still appears, a factory reset could be required to fix more difficult problems. The Velop node can be reset as follows:
- Find the node’s reset button at the bottom.
- Press and hold reset switch
- The node will return to its factory settings when the button is released.
- You’ll need to use the Linksys app to go over the setup process once more subsequently resetting the node.
Get in touch with Linksys Support
It might be necessary to get in touch with our experts if you’ve followed all of the previous instructions and the Linksys Velop Purple Light is still there. A hardware malfunction or a more complicated setup issue requiring expert assistance might be the cause of the problem.
Final thoughts
Your Velop mesh system is in setup mode if it has a Linksys velop node purple light. This means that it hasn’t finished configuring or connecting to the internet. Even while this could seem like a difficult problem, by following the above troubleshooting procedures, it’s typically something that can be simply addressed.
Most customers should be able to fix Linksys Velop Purple Light issue and get their Wi-Fi network back up and running in no time at all by doing things like verifying their internet connection, rebooting the router, and making sure the configuration instructions are followed exactly.
FAQs
Why does my Linksys Velop keep showing a purple light even after rebooting?
After restarting, if Linksys velop node purple light displays, there may be a problem with the configuration or a connection. It indicates that either the router setting is incomplete or it is not able to connect to the internet. Check your modem connection and network settings once more, or attempt configuring the node using the Linksys app once more.
Can the purple light on Linksys Velop indicate a hardware issue?
Although purple light on linksys velop often indicates a setup or internet connectivity issue, if it continues after troubleshooting, it may be an indication of a hardware problem. Issues such as bad ports, damaged cables, or malfunctioning internal gear may hinder appropriate setup. It could be required to get in touch with Linksys support or look for a replacement if simple troubleshooting doesn’t work.
How do I reconnect my Linksys Velop to the internet if the purple light is showing?
Make sure your modem is operational and correctly linked to the node before attempting to reconnect your Linksys Velop to the internet. Try configuring the Velop using the Linksys app after restarting both devices and making sure the wires are firmly inserted. Reset linksys Velop and start the setup procedure over if issues continue.
Will resetting my Linksys Velop resolve the purple light issue?
The continuous purple light issue on your Linksys Velop may usually be fixed by resetting it. By returning the gadget to its original configuration, a factory reset removes any configuration problems. Resetting the Velop will need you to set it up using the Linksys app again, which should solve any software or setup-related difficulties.
Does a purple light during setup mean there’s a problem?
It’s typical for the device to be in setup mode and await configuration during setup, indicated by a purple light. After setup is complete, if the purple light is still there, there may be a problem with your internet connection or incorrect configuration.
